![]() If the error is related to the idler being stalled or material not being present, ensure that the material is properly loaded and that the end of the material has not been pulled into the extruder.Ĥ. If so, untangle the cartridge or clear the blockage.ģ. For material flow errors, check if the material cartridge is tangled or if there is a blockage in the extruder. Error codes related to material flow and temperature are commonly encountered.Ģ. Identify the error code displayed on the printer's screen. To resolve an error message displayed on the CubePro Trio 3D printer, follow these steps:ġ. Once completed, select the checkmark to exit the utility.īy following these steps, you can troubleshoot print quality problems with the CubePro Trio 3D printer. If there is no resistance on the paper, rotate the adjustment knob counter-clockwise (from the bottom) until there is slight resistance.ġ1. If there is slight resistance, proceed to step 11.ġ0. Once the print jets have moved to the left rear of the print pad, slide the paper between the print jets and the print pad. Select the upper left corner of the triangle.ĩ. If there is no resistance on the paper, rotate the adjustment knob counter-clockwise (from the bottom) until there is slight resistance.Ĩ. If there is slight resistance, proceed to step 8.ħ. Once the print jets have moved to the front center of the print pad, slide the paper between the print jets and the print pad. Select the lower middle triangle on the touchscreen display.Ħ. Be cautious not to set the print pad too high to avoid damage.ĥ. ![]() If the paper slides easily between the print jets and print pad, rotate the adjustment knob counter-clockwise (from the bottom) until there is slight resistance. If there is slight resistance, proceed to step 5.Ĥ. Slide a designated page from the Setup/Repack instructions between the print jets and the print pad. The print jets will move to the right rear of the print pad.ģ. Select the upper right corner of the triangle on the touchscreen display. Navigate to the Print Plate Calibration screen on the touchscreen display and select "LEVEL PLATE."Ģ. To troubleshoot print quality problems with the 3D Systems CubePro Trio 3D printer, follow these steps:ġ. ![]() Its Wi-Fi and USB connectivity options provide convenience, while its compatibility with multiple operating systems makes it suitable for a wide range of users. Overall, the 3D Systems CubePro Trio is a versatile 3D printer with the ability to print using different materials and produce high-quality prints with precision. Its minimum processor speed requirement is 2 GHz, ensuring smooth and efficient operation. The CubePro Trio has an accuracy level of 1%, ensuring that prints are produced with consistent quality. It supports various Windows operating systems, including Windows 10 Education, Windows 10 Enterprise, and Windows 8.1, as well as Mac OS X 10.9 Mavericks. With a maximum vertical print speed of 54000 millimeters per hour, the CubePro Trio is capable of quickly producing prints of various sizes. It also offers a maximum extruder tip temperature of 280 degrees Celsius, enabling it to handle a wide range of materials. The printer is equipped with Wi-Fi connectivity and a USB port, allowing for easy file transfer and remote monitoring capabilities. With a minimum layer thickness of 0.07 millimeters and a maximum layer thickness of 0.3 millimeters, it can produce detailed prints with high precision. The 3D Systems CubePro Trio is a 3D printer that can print using ABS and Polylactic acid (PLA) materials.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |